Dwellings of Eldervale Player Tray Covers
Survive Escape from Atlantis! Custom Expansion Kit
Information, Tips, Tricks and FAQ
RPG Trees
For more information contact us at info@prawndesigns.com.
Please read the Laser Cutting and Engraving FAQ page for more details on laser cutting and side effects.
NOTE: All of the images are links. Click on any of the images to see a larger version in a new window.
Do you play RPG games like Dungeons and Dragons with 3D terrain and miniatures? Are you looking for "3D" trees to use in outdoor encounters? We might have what you need.
Laser cut Baltic Birch 18" plywood Trees. All trees are shipped in raw wood ready to be painted by you. All trees come with optional tree stands that give you a place to put a miniature up in a tree.
Storage is always an issue with RPG Table Top terrain and scatter terrain. These trees come in two pieces, when not in use take them apart and they take up very little room.
Tree Tops and Bottoms of different designs with the same length tree slots can be swapped to make more tree variations.
RPG Tree Top Pinch Point
The RPG Tree Tops have a pinch point at the bottom of the slot to help keep the Top and Bottom together. Baltic Birch Plywood is not exactly the same thickness on all pieces. If you find it hard to put a top onto a bottom, use some 100 grit sandpaper to lightly sand the inside of the pinch point.
Tree Designs
We have designed a number of different shaped trees. Not finding what you want or need, ask and we might be able to make a new design to meet your need.
Tree Design 1
RPG Tree design 1 is approximately 4" tall. The tree stand is at approximately 3" off the ground. Tree Slot is 2".
Includes:
- Tree Bottom
- Tree Top
- Tree Stands X2
Tree Design 2
RPG Tree design 2 is approximately 4" tall. The tree stand is at approximately 3" off the ground. Tree Slot is 2".
Includes:
- Tree Bottom
- Tree Top
- Tree Stands X2
Tree Design 3
RPG Tree design 3 is approximately 4" tall. The tree stand is at approximately 3" off the ground. Tree Slot is 2".
Includes:
- Tree Bottom
- Tree Top
- Tree Stands X2
Tree Design 4
RPG Tree design 4 is approximately 4" tall. The tree stand is at approximately 3" off the ground. Tree Slot is 2".
Includes:
- Tree Bottom
- Tree Top
- Tree Stands X2
Tree Design 5
RPG Tree design 5 is approximately 6" tall. The tree stand is at approximately 4" off the ground. Tree Slot is 2 7/8".
Includes:
- Tree Bottom
- Tree Top
- Tree Stands X2
Tree Design 6
RPG Tree design 6 is approximately 4 1/2" tall. The tree stand is at approximately 3" off the ground. Tree Slot is 2".
Includes:
- Tree Bottom
- Tree Top
- Tree Stands X2
Tree Design 7
RPG Tree design 7 is approximately 4. 1/4" tall. The tree stand is at approximately 3" off the ground. Tree Slot is 2".
Includes:
- Tree Bottom
- Tree Top
- Tree Stands X2
Tree Design 8
RPG Tree design 8 is approximately 4" tall. The tree stand is at approximately 3" off the ground. Tree Slot is 2".
Includes:
- Tree Bottom
- Tree Top
- Tree Stands X2
Tree Design 9
RPG Tree design 9 is approximately 4" tall. The tree stand is at approximately 3" off the ground. Tree Slot is 2".
Includes:
- Tree Bottom
- Tree Top
- Tree Stands X2
Tree Set, Designs 1 to 9
RPG Tree designs 1 to 9.
Includes:
- Tree Bottoms X9 one of each design
- Tree Tops X9 one of each design
- Tree Stands X13
Painting Examples
Standard Trees. Look at your local hardware store in the spray paint section, you should find some flat camouflage colors. I stared with a brown color for the trunk of the tree. I then added a couple color of camouflage green.
After this was dry I used regular water based craft paint. I used a sponge with big open cells to dab on more colors of green onto the tree.
Fall colors. This was done entirely with spray paint. I started with a base of brown. Then added light passes with Red and Yellow.
Ordering
To place an order send an email to orders@prawndesigns.com . Include a list of what you want to order (Part Number and Description) and your shipping address. We will get back to you with an estimate of when we will have your order is ready to ship and shipping costs.
Some items are available in the Prawn Designs Etsy Store.
Please read the Laser Cutting and Engraving FAQ page for details on laser cutting and engraving side effects.
Title Price List
| Part Number | Title and Description | Price | Image |
|---|---|---|---|
PD-12034 |
RPG Tree Design 1RPG Tree Design 1. Includes:
|
$4.00 |
 |
PD-12035 |
RPG Tree Design 2RPG Tree Design 2. Includes:
|
$4.00 |
 |
PD-12036 |
RPG Tree Design 3RPG Tree Design 3. Includes:
|
$4.00 |
 |
PD-12037 |
RPG Tree Design 4RPG Tree Design 4. Includes:
|
$4.00 |
 |
PD-12038 |
RPG Tree Design 5RPG Tree Design 5. Includes:
|
$4.00 |
 |
PD-12039 |
RPG Tree Design 6RPG Tree Design 6. Includes:
|
$4.00 |
 |
PD-12040 |
RPG Tree Design 7RPG Tree Design 7. Includes:
|
$4.00 |
 |
PD-12041 |
RPG Tree Design 8RPG Tree Design 8. Includes:
|
$4.00 |
 |
PD-12042 |
RPG Tree Design 9RPG Tree Design 9. Includes:
|
$4.00 |
 |
PD-12043 |
RPG Set of Trees, Designs 1 to 9RPG Tree Designs 1 to 9. Buy a set and save approximately 25%. Includes:
|
$27.00 |
 |
Ordering
To place an order send an email to orders@prawndesigns.com . Include a list of what you want to order (Part Number and Description) and your shipping address. We will get back to you with an estimate of when we will have your order is ready to ship and shipping costs.
Some items are available in the Prawn Designs Etsy Store.
Please read the Laser Cutting and Engraving FAQ page for details on laser cutting and engraving side effects.
Disclaimer: This is an accessory for the game, not a replacement. You will need to have a copy of the game to play. This project is in no way affiliated or endorsed by the publishers or trademark holders of the game.